Guard control

Product Description:

Make your Guard Patrol system more efficient and highly effective in almost no time with Rosslare’s GCK-01 DigiToolTM Guard Patrol Kit. The kit includes all of the necessary equipment that you need to begin, all you need is a PC with an available COM port.

The GCK-01 kit includes Rosslare’s DigiToolTM Lite Report software allowing you to manage your Guard Patrol system, download patrol data from the GC-01 Data Acquisition Reader, and create reports for Patrol Analysis and Personnel management.

The advanced design of the DigiToolTM Guard Patrol system allows for complete upgradeability. Users can be added and the more advanced GS-02 DCC software will help you to expand your patrol area, even across State or International Boundaries.

Product Features:

• Complete Guard Patrol kit to begin operations immediately after quick configuration
  
• Economical-value
  
• Complete upgradeable, as your Guard Patrol area and personnel grow

GCK-01 Components:

• One (1) GC-01 Data Acquisition Reader
  
• One (1) GC-02 Data Acquisition Base plus localized AC/DC Adapter
  
• One (1) GA-06 Reader Leather Holster
  
• One (1) GA-02 Digital Wallet
  
• Twelve (12) GA-01 Location Tags
  
• One (1) GA-05 9-pin Serial Cable
  
• DigiToolTM Lite Report software

Product Description:

Rosslare’s ORIGINAL DigiToolTM GC-01 “Reader” is special hand-held iButton reader designed for trouble-free Guard Patrol Touring applications.

The whole system enables the guard touring administration of guards, tours, location tags, user and events tags. Raw Data is downloaded to either the Reports Light (free PC software), or the advanced Call Center remote monitoring software, to generate reports and data analysis.

Product Features:

• Built-in 360o LED array for increased visibility of valid iButton reads
  
• Built-in vibrating motor for tactile read confirmation
  
• Built-in beeper for audio read confirmation
  
• Highly rugged and waterproof IP-65 design
  
• Encapsulated in both thick poly-carbonate, and carbon-hardened stainless steel construction
  
• High Capacity 8000 event non-volatile event memory
  
• High Capacity Rechargeable internal Lithium-Ion battery with 1800 mAh
  
• No User serviceable parts, with tamper evident seal, and microwave evident label is optional.

Product Description:

Rosslare’s DigiToolTM GC-02 “Base” is special desktop or wall-mountable docking station/charger for the GC-01 Reader. By providing an RS-232 interface to the PC, and an iButton reader locally, the “Base” is the perfect partner for local, single PC controlled applications.

The GC-02 “Base” is highly integrated with the other DigiToolTM family of Guard Patrol products, including the GCK-01 KIT, and the GC-50 PSTN “Station” communicator.

Product Features:

• User Alerts for Battery Charging and GC-01 Battery full modes
• Full Duplex RS-232 Communication at 9600 Baud
  
• Built-in Charger front-Aend for the rechargeable 1800 mAh Lithium-Ion battery in the GC-01 Reader
  
• Compatible with GC-50 Station communicator for seamless upgradeability
  
• Built-in iButton reader for enrolling Location, Event and User tags to the PC Software
  
• Wall-mount option saves on desk-space
  
• Small Desktop footprint, with Rubber Feet
  
• Rotating RS-232 and 3 mm Barrel Socket
  
• Spring Loaded Contacts for easy GC-01docking

Product Description:

Rosslare’s DigiToolTM GC-03 “Charger” is special desktop or wall- mountable docking charger for the GC-01 Reader. The GC-03 can be strategically placed in remote locations throughout the Guard Patrol tour, when returning timely to the “Base” is not an option.

The GC-03 “Charger” will help to expand your guard tour area, and potential customers you can serve remotely. This unit comes with a localized AC/DC Adapter.

Product Features:

• User Alerts for Battery Charging and GC-01 Battery full modes
  
• Built-in Charger front-end for the rechargeable 1800 mAh Lithium-Ion battery in the GC-01 Reader
  
• Wall-mount option saves on desk-space
  
• Small Desktop footprint, with Rubber Feet
  
• Spring Loaded Contacts for easy GC-01 docking

Product Description:

The GC-50 DigiToolTM “Station” is Rosslare’s optimized hardware solution for managing a distributed DigiToolTM Guard Patrol monitoring system over a large geographic area.

Each GC-50 supports one GC-02 DigiToolTM ”Base”. Once the GC-02 is connected to the GC-50, then the set can be installed in a remote location, which is connected to DC power and to the PSTN system for remote communications.

Product Features:

• Custom Security Codes for Each Unit
  
• Internal Real Time Calendar/Clock with Battery Backup
  
• Advanced Microprocessor electronics Large Embedded Internal Memory - can hold data from over 32 full Readers (256,000 time-stamped events)
  
• Battery backup - downloaded events for up to 6 months when the DC input power is disconnected
  
• Attractive design concept integrates all components into one compact set User friendly operation

Product Description:

The DigiToolTM GA-01 “Location Tag” is used to mark and identify the locations where Guards on patrol need to visit during the tour, whether throughout a commercial establishment, college campus, residential neighborhood, or in areas of specific high-value items.

The Location Tag contains a sealed stainless steel metal coded button, inside hardened ABS plastic, and is sutiable for indoor and ourdoor applications. The GA-01 is permanently mountable using either glue, or screws to the asset or location.

Product Features:

• Encapsulated in hardened plastic and stainless steel for durability Lightweight, portable, easy-to-install
  
• Coding is a 16-Byte ID with open or custom facility codes which provides over a billion combinations.
  
• Option to mount with Glue, 2 Screws or 4 Screws to almost any solid flat surface.
  
• ABS plastic housing available in the following colors: Black, Red, Yellow, Purple, and Orange.

Product Description:

The GS-02 DigiToolTM PC Software provides a full-featured management interface enabling the Guard company to manage various aspects of the guard system.

Easy-to-use, but very powerful, the DigiToolTM DCC can empower your Guard Patrol system, from small to large topologies. This application is flexible enough to grow with your system, even across International boundaries - supporting your company growth.

Product Features:

• Custom Security Codes for Each PC
  
• Full-featured MS Access Database with
  
• MS SQL Upgrade for large installations
  
• Advanced 32-Bit Microsoft .Net Platform
  
• Modem Management System with Task Scheduler - saving Time and Money
  
• Object Orientated Software Architecture User-friendly operation - Wizards and easy-to-navigate Graphical User Interface

Product Description:

Rosslare’s DigiToolTM system comes with the option of using fixed-location iButtons (GA-01) or two options of Digital Wallets, for further enhancing your Guard Patrol system and Event Monitoring analysis. The Digital Wallets allow you to uniquely define specific events, that will be recognized by the GS-02 DC PC application after data has been downloaded.

The GA-02 Digital wallet contains 12 iButtons, for numbers 0-9, with two iButtons for START and STOP.

The GA-12 Digital Event wallet has 12 pre-defined events, e.g. Fire, Door Ajar, Broken Window, etc.

Product Features:

• Ability to manage events by Event-specific iButtons or unique Digital code for more complex event reporting and analysis
  
• Sturdy iButton mounting on ABS plastic inside of a soft leather wallet
  
• Lightweight and fashionable design, and easy-to-carry