Can be programmed
through integrated keypad
or SMS text messages
sent to the system
3 Inputs separately
programmable and configurable
+ 1 input for notification
of activation/deactivation
of external devices
3 PGM Outputs controllable
by user for remote switching
of other devices
Up to 208 telephone
numbers can act on a
PGM output
Simulated PSTN line
at 12V, transparent
to DTMF tones and for
remote controlling of
other devices
Open Collector Outputs
to notify: fault, GSM
activity and signal
strength
8 telephone numbers
for telephone calls
and notification through
digital protocols
Metal cover - Dimensions:
H 200 x L 260 x D 45
mm
http://www.amcelettronica.com
GS3055-I
GSM Alarm Communicator
Product Description:
The GS3055-I
GSM universal wireless
alarm communicator can
be used in a backup or
primary role. The GS3055-I
connects the alarm control
panel to the GSM network
and reports alarm signals
directly to a monitoring
station receiver (Sur-Gard™
System II/System III).
For those customers not
using a traditional PSTN
phone line, the communicator
can be utilized as a primary
alarm communicator. The
GS3055-I uses the GPRS
data channel of the GSM
network to ensure low-cost,
high-speed and reliable
alarm communications and
is compatible with any
control panel that communicates
using the Contact ID format.
Product Features:
Compatible with any
control panel that communicates
using the Contact ID
format
Full event reporting
Uses GPRS data channel
for high-speed, reliable
and low-cost communications
to an IP receiver
4 on-board inputs
4 on-board outputs
(open collector)
SIM card (included)
Activation and initialization
via the automated telephone
activation system (VRU)
or web-user interface
provided by CONNECT
24™
Advanced programming
via web-user interface
Compatible with Sur-Gard
System II/III monitoring
station receivers
Special rate plans
and administration through
CONNECT 24
UL/ULC listed
http://www.dsc.com
B-TEL99
Voice telephone dialer
Product Description:
The B-TEL99
voice telephone dialler
is the best way to complete
an installation that requires
a voice dialler. It has
2 alarm channels, and
is able to monitor 2 distinct
events
(e.g. the burglary alarm
and fire alarm). The B-TEL99
offers advanced management
of alarm messages, the
recording time (32 seconds)
can be divided into one,
two or three messages
as required. The messages
are recorded on a solid-state
memory. The quality of
recorded messages may
be checked on the built-in
loudspeaker. By dialling
the user code on the telephone
keypad, the user who receives
an alarm call from the
B-TEL99, can listen-in
on the environmental sounds
picked up by the dialler
microphone, and
consequently, decide consequently
on the action. The user
code can also interrupt
the alarm calls from the
B-TEL99 keypad. The programmable
installer code accesses
programming, which is
made quick and easy by
the alphanumeric keypad
and LED display. The B-TEL99
event logger allows viewing
of the result of the last
255 calls.
The attractively designed
plastic box is perfect
for on-view installation.
Product Features:
2 alarm channels with
priority management
7 programmable telephone
numbers for each channel
15 digits available
for each telephone number:
allows pauses of 1 or
5 seconds
Possibility to record
either one, two or three
messages: 1 message
of 32 seconds max. common
to both channels; 1
message of 16 seconds
max. for each channel;
1 message of 16 seconds
max. common to both
channels and 1 message
of 8 seconds max. for
each channel
Repeats alarm message
for 20, 40, 60 or 80
seconds
Repeats the call
cycle up to 5 times
Terminal for call
cycle interruption
Possibility to stop
alarms via keypad by
means of a PIN code
Programmable installer
code for access to programming
Possibility to program
alarm call activation
by means of positive
drop or negative command
Bypassable “Answer
check”
Storage of the last
255 calls
Remote listen-in
and interrupt alarmcallcycle
by entering user code
on telephone keypad
Protection against
accidental polarity
inversion of the battery
http://www.bentelsecurity.com
BGSM-A
GSM communication
Product Description:
BGSM-A
is the state of the art
for the integration between
security systems and GSM
communication. It can
be simply and cost-effectively
integrated with all alarm
systems, and can operate
as a GSM interface, voice
dialler, SMS dialler and
remote control via SMS.
The BGSM-A Interface facility
allows ordinary two-wire
PSTN telephones to switch
to the GSM network in
the event of PSTN Trouble
(line down). The simulated
line, provided by the
BGSM-A, supplies the line
and ring voltage, thus
allowing the hardwired
telephone device to operate
as a wireless device.
The BGSM-A can also operate
as a 4 channels SMS dialler.
In fact, it provides 4
inputs (channels), each
able to manage 2 text
messages (SMS), that will
be sent when the channel
status changes. The 4
input channels can also
be used to activate the
GSM voice dialler facility.
The BGSM-A can be used
in numerous telematic
applications, and it is
the perfect way to complete
a security system. Available
in two models: BGSM-A/12
powered by 13,8Vdc; BGSM-A/230
powered from mains.
Product Features:
Supplies a simulated
PSTN line
4 Inputs for the
activation of voice
and SMS dialler (optional
NC2/VOX board required
for voice dialler)
8 telephone numbers
available for the Voice/SMS
dialler facility
5 outputs open collector
(150mA)
Output control via
SMS
Outputs can be used
for status and troubles
signalling
Programmable output-activation
polarity
Management of incoming
and outgoing calls
Incoming and outgoing
call LED’s
Signal strength indicator
Display for device
status signalling
Includes prefix when
operating in Interface
mode
Dual-band
SIM card programmable
via any GSM cellphone,
or via a specific software
application (runs under
Windows)
Calls register available
via software
Dimensions antenna
excluded (wxhxd): 141x233x59
mm
Weight (without battery):
1,29 Kg (BGSM-A/12);
1,6 Kg (BGSM-A/220)
http://www.bentelsecurity.com
BGSM-I
GSM communication
Product Description:
The BGSM-I
gives total confidence
in all security and surveillance
applications and is the
ideal way of completing
whatever system. It provides
advanced communication
features through the GSM
network and can be used
in numerous telematic
applications. BGSM-I functions:
BACKUP LINE (SIMULATED
LAND LINE) The BGSM-I
simulated land line feature
provides traditional telephone
devices with a backup
line. The BGSM-I will
switch to the simulated
line in the event of land
line trouble (line down).
Under normal circumstances,
neither the BGSM-I nor
the connected telephone
device will require programming.
SMS DIALLER The SMS dialler
function manages 8 telephone
numbers and, when the
status changes occur on
its 4 inputs, provides
the respective message.
The SMS dialler function
also sends trouble alert,
periodic transmission
and pay-as-you-go balance
messages (pre-paid SIM
cards). HOUSEHOLD APPLIANCE
MANAGEMENT VIA SMS The
BGSM-I can recognize the
incoming SMS messages
(with password protection)
and turn On/Off the 4
outputs available for
this function. GATE CONTROL
FUNCTION The BGSM-I provides
95 programmable telephone
numbers. On recognition
of an incoming call from
any of these numbers,
the device will activate
the respective output
(“Gate Control”) without
answering the call. This
feature in cost free.
CONTACT ID DIALLER The
BGSM-I sends input, PSTN
line and power supply
status reports to central
stations using Contact
ID reporting format, and
also sends periodic messages.
These communications can
be sent to 4 telephone
numbers. The BGMS-I is
protected against tamper
and provides tamper signalling
on two terminals. This
device can be programmed
and controlled via a user-friendly
PC software application
(accessory item).
Product Features:
Simulates PSTN line
(backup line)
Compatible with whatever
control panel
Switches automatically
to GSM network in the
event of PSTN trouble
(line down)
8 telephone numbers
(max. 20 digits) for
SMS dialler
4 telephone numbers
(max. 20 digits) for
Contac ID communicator
95 telephone numbers
(max. 20 digits) for
remote control of the
outputs
4inputs for SMS Dialler
and Contac ID communicator
activation with 2 SMS
messages, user codes
and
Contac ID event for
each input
Programmable Input-activation
polarity
Send SMS and Contac
ID “Trouble” reports
Send SMS and Contac
ID “Periodic” reports
Pay-As-You-Go balance
report
4 programmable open-collector
outputs (monostable
or bistable)
Remote control by
means of SMS message
to BGSM-I
Remote control feedback
(SMS message of ring)
Outputs can be used
for device status signals
Incoming and outgoing
call mamagement
SIM card can be programmed
via GSM cellphone or
software application